Implementation of LED Control through IR Sensor using FPGA
M.Bhavani1, B.Maha Lakshmi2
1M.Bhavani, Department of ECE, Bapatla Women’s Engineering College, Bapatla, A.P, India.
2B.Maha Lakshmi, Department of ECE, Bapatla Women’s Engineering College, Bapatla, A.P, India.
Manuscript received on 06 April 2021 | Revised Manuscript received on 24 April 2021 | Manuscript Accepted on 15 March 2021 | Manuscript published on 30 March 2021 | PP: 7-11 | Volume-1 Issue-1, March 2021 | Retrieval Number: A1003031121/2021©LSP
Open Access | Ethics and Policies | Indexing and Abstracting
© The Authors. Published by Lattice Science Publication (LSP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This project represents interfacing of IR sensor with the Spartan-3E FPGA board with verilog segments important to execute the desired functionality. The fundamental of the project is to build up by using the smart LED and it should be done by the remote controlling device only. The components used here are reflected by taking the readings demonstrated device, and it is used when in the lighting of a system. This proposed LED lighting system is a remotely controlled and self learning mode and it is managed by the usage of remote. This project can be mostly done by utilizing FPGA. For the most part at whatever point the remote is made on then the drove should glow else it ought to be in off condition. The circuit basically comprises of a transmitter, the collector comprising of an IR module, CD4017 IC, LED’s to show the gathering of the IR radiations, generally demonstrating the ON/OFF state, transfer and other components. The entire structure is to be actualized on FPGA board by composing a verilog code in Xilinx ISE for Binary to ASCII Decoder and subsequently the recreation results and yield on FPGA Interface with 16×2 dot matrix on lcd display will be analysed.
Keywords: FPGA, IR Sensor, LED, Verilog.